The neck is 3 x 1/4 flatstock backed by 3/4 black pipe, welded to the body by 1 inch square bar that holds the bridge support and the tail spike. The headstock and bridge support are 3 x 1/2 inch plate. The nut is 1/4 flatstock, the bridge 3/4 x 3/4 x 1/8 angle iron. The three flatwound strings are tuned E A D by bass machine heads. The resonator is the lower half of a twenty pound propane tank, the sound board is 1/8 plate, Two 3/8 bolts support a single coil pick-up.
Bass full view
Detail of Bass
|Home - About - Aesthetics - Mechanics - Acoustics - email@example.com|